Покупка RX-8 2.6 Подскажите! |
Здравствуйте, гость ( Вход | Регистрация )
Покупка RX-8 2.6 Подскажите! |
23.2.2011, 21:30
Сообщение
#1
|
|
|
Новичок (<30 постов) ![]() Группа: Пользователи Сообщений: 3 Регистрация: 23.2.2011 Пользователь №: 4163 |
Предложили покупку RX-8! 2005 год выпуска, говорят, что мотор 2.6 (не ротор!!!). Внимание вопрос-есть ли такие моторы у RX-8, либо ето развод, а в ней все-же 1.3. В поисковике что то подобное нашлось, но с неточным описанием! Буду признателен за любую инфу!
|
|
|
|
![]() |
24.2.2011, 20:29
Сообщение
#2
|
|
![]() Старик (>150 постов) ![]() ![]() ![]() Группа: Пользователи Сообщений: 267 Регистрация: 30.10.2009 Пользователь №: 3429 |
Цитата Там написано что не ротор tongue.gif где, в документах, или со слов не очень (технически) грамотного продавца?? - "The SAE (Society of Automotive Engineers) defined way of measuring the displacement of a rotary is to measure the difference in volume of the combustion chamber between when it is at its largest and smallest. Since each rotor has three of these chambers and there is one combustion event per rotation of the eccentric shaft, a 1.3 liter rotary would burn 1.3 liters of fuel and air per eccentric shaft rotation. A 2.6 liter reciprocating engine would burn this same amount. This confuses some people and makes them claim that rotary engines have twice the displacement their manufacturers claim they have. There is not right or wrong in this case. Rotary engines are different from reciprocating engines, so of course they need to be treated differently." и еще - http://www.rx7.com/techarticles_displacement.html -------------------- Раньше я относился к людям ХОРОШО, а теперь ВЗАИМНО…)
|
|
|
|
24.2.2011, 21:33
Сообщение
#3
|
|
![]() ɹǝʍod ʎɹɐʇoɹ ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Группа: Пользователи Сообщений: 2515 Регистрация: 5.5.2008 Из: г. Долгопрудный Пользователь №: 1982 |
где, в документах, или со слов не очень (технически) грамотного продавца?? - "The SAE (Society of Automotive Engineers) defined way of measuring the displacement of a rotary is to measure the difference in volume of the combustion chamber between when it is at its largest and smallest. Since each rotor has three of these chambers and there is one combustion event per rotation of the eccentric shaft, a 1.3 liter rotary would burn 1.3 liters of fuel and air per eccentric shaft rotation. A 2.6 liter reciprocating engine would burn this same amount. This confuses some people and makes them claim that rotary engines have twice the displacement their manufacturers claim they have. There is not right or wrong in this case. Rotary engines are different from reciprocating engines, so of course they need to be treated differently." и еще - http://www.rx7.com/techarticles_displacement.html Про то что коэфициент на 2-х секционник как 2.6 я знаю И пошли они лесом за такое, дебилы! И я бы не удивился если-бы такое только в рашке было, так такое везде. Ну вообщем кто придумал - тот и идиот! -------------------- |
|
|
|
accordsss Покупка RX-8 2.6 Подскажите! 23.2.2011, 21:30
power1 ЦитатаПредложили покупку RX-8! 2005 год выпуск... 23.2.2011, 22:32
SanekMD Цитата(power1 @ 23.2.2011, 22:32) в некот... 24.2.2011, 0:02
GOA Цитата(power1 @ 23.2.2011, 22:32) в некот... 24.2.2011, 18:06
SanekMD Лучше найти сразу с 8-ми литровым V10! Вот это... 23.2.2011, 23:04
protor а что за такой мотор 2.6 объемом ??
на слуху особ... 24.2.2011, 20:25
accordsss машина в 01.03.2011 будет уже в Минске! Сама м... 24.2.2011, 21:53
fd-rs слышал что были такие , в сингапуре таких... 25.2.2011, 20:41
power1 Цитатамашина в 01.03.2011 будет уже в Минске! ... 25.2.2011, 22:05
Offy уже 1 число)) 1.3.2011, 16:53
vroomer уже 2 число)) 2.3.2011, 12:00
accordsss Cпасибо всем за ождание!!!
Машина оказ... 4.3.2011, 18:38
Offy а про сингапурский рынок ни кто ничего так и ненар... 5.3.2011, 12:21![]() ![]() |
|
Текстовая версия | Сейчас: 22.5.2026, 2:45 |